Radioberry

Installing the Radioberry hat.

Radioberry drivers

Add the hat to the Raspberry Pi, power up and connect using SSH.

Follow the commands on PA3GSB github page as below: 

cd /tmp
wget https://raw.githubusercontent.com/pa3gsb/Radioberry-2.x/master/SBC/rpi-4/releases/dev/radioberry_install.sh
sudo chmod +x radioberry_install.sh
./radioberry_install.sh

Choose the appropriate Cyclone chip. I have found that the black boards usually have the CL016 and the green Aursinc boards are CL025 but check the chip to be sure.

When the install has completed reboot: 

sudo reboot

After reboot there should be a working remote SDR.
Using software such as SparkSDR on a desktop should find a Hermes Lite 2 device on the network.